Izdelki za in šobe (58)

Features Flat spray pattern with uniform distribution throughout pattern area. Small 1/8 pipe connection size for high pressure cleaning. Applications High pressure cleaning: Automotive, containers, tanks, wire and felt parts of paper making machines, wire cylinders, filter presses, other industrial cleaning and degreasing Pipe conn. size:R1/8" Spray angle:15-65° Mean droplet diameter:- Strainer:Not included Standard pressure:0.3 MPa (ca. 3 bar) Spray capacity:2.47–12.4 ℓ/min Air Consumption:- Free passage diameter:0.6–1.7 mm

Features Full cone spray pattern with a round impact area and uniform distribution. Spray capacity ranges from small to medium. X-shaped whirler provides large free passage diameter for minimal clogging. Applications Cleaning: Gas, incinerator fumes, machinery, eliminators, screen, tanks, parts, crushed stones, earth and sand, PCB, others Cooling: Gas, machineries, tanks, steels Spraying: Waste water treatment, aeration, foam breaking, fire extinguishing, dust suppression, sea water desalination, etching, chemical treatment Pipe conn. size:R 1/8" - R 3/8", Rc 3/8" - Rc 3" Spray angle:55-105° Mean droplet diameter:270–1,950 μm Strainer:Available for some nozzle codes Standard pressure:0.2 MPa (ca. 2 bar) Spray capacity:0.50–1,200 ℓ/min Air Consumption:- Free passage diameter:0.4–20.0 mm

Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. No falling off of tip or packing when removing the nozzle part. [INVV series (plastic)] Made of high chemical and heat resistant PP (polypropylene). Nozzle tips are color-coded by spray capacity for easy identification. Applications [INVV series (plastic)] Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required Pipe conn. size:R1/8" Spray angle:50-1115° Mean droplet diameter:160–400 μm Strainer:Not included Standard pressure:0.3 MPa (ca. 3 bar) Spray capacity:0.5–5.0 ℓ/min Air Consumption:- Free passage diameter:0.3–1.6 mm

Features Small capacity full cone spray nozzles. Disc whirler is designed to provide uniform spray distribution at small spray capacity. Made of excellent wear-resistant PTFE (polytetrafluoroethylene) and injection molded PVDF (polyvinylidene fluoride). Applications Spraying: Etchants, acid liquids Cleaning with pure water Pipe conn. size:R 1/8" - R 1/4" Spray angle:60-90° Mean droplet diameter:260–520 μm Strainer:Not included Standard pressure:0.2 MPa (ca. 2 bar) Spray capacity:0.50–6.00 ℓ/min Air Consumption:- Free passage diameter:0.4–1.6 mm

Features Full cone pneumatic spray nozzle producing a large amount of “fine fog”. Energy-saving design – mean droplet diameter of 50 μm and a maximum droplet diameter of 150 μm (*4) at an air-water ratio of 130. Large turn-down ratio. Spray angle of 20° or 60°. *1) Measured at compressed air pressure of 0.2–0.5 MPa (ca. 2 bar – 5 bar) and liquid pressure of 0.2–0.5 MPa (ca. 2 bar – 5 bar). *2) Measured at compressed air pressure of 0.2–0.5 MPa (ca. 2 bar – 5 bar). *3) Free passage diameter of liquid inlet for GSIMⅡ60° spray angle type. *4) Measured by Laser Doppler Method. Applications Cooling: Gas, moldings, refractories Moisture control: Gas, concrete Combustion: Oil, waste fluid Dust suppression: Recycling facilities, material facilities, moldings Thread standard:- Pipe conn. size:Liquid inlet: Rc 3/8" - Rc 3/4", Air inlet: Rc 3/8", Rc 1/2" Standard pressure:- Spray angle:20°, 60° Spray capacity:15–2,000 ℓ/hr (*1) Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:30–80 μm Air Consumption:150–4,000 ℓ/min, Normal (*2) Air pressure:- Free passage diameter:1.8–4.0 mm (*3)

Features Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.** Ultra-compact size. About 42 mm in total length including control adaptor. Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa (ca. 1 bar – 3 bar). Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio). Spray angle of 110 °, 80 °, or 45 °.* Capable of spraying smallest flow rate among all of our pneumatic spray nozzles. Spray ON/OFF can be regulated by switching the pilot air ON/OFF (adaptor type SP) or by turning compressed air ON/OFF (adaptor type SN). *Spray angle measured at compressed air pressure of 0.3 MPa (ca. 3 bar) and liquid pressure of 0.1 MPa (ca. 1 bar). **Mean droplet diameter measured by Laser Doppler Method. Thread standard:- Pipe conn. size:M3 depth 2.5 (Air inlet/pilot air), M3 depth 3 (Liquid inlet) Standard pressure:- Spray angle:110°, 80°, or 45°* Spray capacity:0.25–4.0 ℓ/hr Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:20–100 μm** Air Consumption:2.6–12.4 ℓ/min, Normal Air pressure:0.2–0.4 MPa (ca. 2 bar - 4 bar) Free passage diameter:diameter 0.1–0.3 mm (Nozzle orifice)

Features Square full cone spray pattern with uniform distribution. Wide spray angle of 90–100° provides large spray coverage. Square full cone spray pattern leaves no gaps in multiple-nozzle arrangements. X-shaped whirler provides large free passage diameter for minimal clogging. a Applications Cleaning: Gas, incinerator fumes, machinery, eliminators, screen, tanks, parts, crushed stones, earth and sand Cooling: Gas, machinery, tanks, steels Spraying: Waste water treatment, foam breaking, fire extinguishing, dust suppression Pipe conn. size:R 1/8" - R 1/4", Rc 1/8"- Rc 3" Spray angle:65-100° Mean droplet diameter:330–1,700 μm Strainer:Not included Standard pressure:0.2 MPa (ca. 2 bar), 0.35 MPa (ca. 3.5 bar) Spray capacity:2.00–700 ℓ/min Air Consumption:- Free passage diameter:0.9–17.1 mm

Features Flat spray pneumatic nozzle producing semi-fine atomization with a mean droplet diameter of 80 μm or more (*3). Clog-resistant design due to large free passage diameter is suitable for spraying factory effluents and waste water. Simple structure, easy maintenance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca. 1 bar – 4 bar) and liquid pressure of 0.1–0.5 MPa (ca. 1 bar – 5 bar). *2) Free passage diameter of nozzle orifice for DOVVA-G 70° spray angle type. *3) Measured by Laser Doppler Method. Applications Denitration: Gas cooling Moisture control: Flue gas Combustion: Waste water Thread standard:- Pipe conn. size:Rc 1/2" or Rc 3/4" Standard pressure:- Spray angle:70°, 55° Spray capacity:1.0–50 ℓ/min (*1) Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:- Air Consumption:50–3,000 ℓ/min, Normal (*1) Air pressure:- Free passage diameter:2.5–7.5 mm (*2)

Features Liquid pressure type under the liquid pressures of 0.07–0.7 MPa (ca. 0.7 bar – 7 bar). Large turn-down ratio with minimal variation in spray angle. Uniform distribution suitable for multiple-nozzle arrangements. Large free passage diameter minimizes clogging. Standard spray angle of 55°, 70°, 95°, or 110°. Applications Cooling: Gas, steel plates, steel pieces, moldings, etc. [Steel making industry] Steel making process: Cooling continuous casted steel (slab, bloom, billet, beam blank, etc.) Rolling mill process: Cooling roll in heat treatment Thread standard:- Pipe conn. size:on request Standard pressure:- Spray angle:applicable on request Spray capacity:on request Supply air type:Compressed air Liquid feeding system (recommended):Liquid capacity Air consumption (recommended):5 times of largest water capacity Air pressure:on request Free passage diameter:2.0 mm or larger (exception existing)

Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer) Pipe conn. size:R 3/8" Spray angle:- Mean droplet diameter:- Strainer:Included or available Standard pressure:1 MPa (ca. 10 bar) Spray capacity:0.016–3.03 ℓ/min Air Consumption:- Free passage diameter:0.1–1.5 mm

Features Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. Capable of generating extremely fine spray. The whirl chamber is formed by a ceramic orifice and closer, which provides excellent wear resistance. Applications Humidifying: Air handling units, green houses Cooling: Gas, thin plates, poultry Spraying: Alcohol, chemicals Pipe conn. size:R 1/4" Spray angle:60-80° Mean droplet diameter:45–210 μm Strainer:Included or available Standard pressure:0.7 MPa (ca. 7 bar) Spray capacity:2.00–107 ℓ/hr Air Consumption:- Free passage diameter:0.15–0.60 mm

Features Compact cleaning nozzles for low- and medium-pressure specifications. Available in threaded joint type or pin connection type. In addition to standard types, we can also provide a special-order spray nozzle to meet customer’s tank specifications and applications. Applications Tank cleaning, vessel cleaning Pipe conn. size:Rc 3/4" - Rc 2", φ21 - φ50 Rated pressure:0.1–0.5 MPa (ca. 1 - 5 bar) Spray capacity:35.4–395 ℓ/min Reach distance:- Cleaning distance:- Max. allowable temperature: 60°C (140°F)

Features Stable spray pattern under low pressures owing to the involute vortex chamber design. Made of highly wear-resistant SiC (silicon nitride bonded silicon carbide). Lightweight as made in all SiC (less than half of metal nozzle). Applications Absorption tower of flue gas desulfurization equipment Spraying slurry Pipe conn. size:2–4T（Flange size） Spray angle:67-80° Mean droplet diameter:1,800–3,800 μm Strainer:Not included Standard pressure:0.07 MPa (ca. 0.7 bar) Spray capacity:200–1,200 ℓ/min Air Consumption:- Free passage diameter:28–68 mm

Features Cleaning inside pipes and tubes, moving itself by means of spraying solid stream jets in different directions as driving force. High impact jets effectively remove scale and dirt inside pipes. Applications Cleaning: Pipes, drains, water and wastewater pipes, tubes of heat exchangers and cooling machines Others: Removing scale and rust Pipe conn. size:R 1/8" - R 1/2" Spray angle:- Mean droplet diameter:- Strainer:Not included Standard pressure:- Spray capacity:- Air Consumption:- Free passage diameter:-

Automatisch mondstuk van aluminium. Vloeistofinlaat: BSP (F) - 60 l/min. Maximale uitlaatdruk:3 bar (43,5 psi) Bevochtigde materialen:Viton, RVS, NBR, Aluminium Maximale vrije stroomlevering:60 l/min Vloeistofinlaat:1" BSP (V) Vloeistoffen:Diesel Meter:N.v.t Gewicht:1,2 kg (2,6 lb)

AdBlue/DEF-sproeiers met roestvrijstalen en thermoplastische versies verkrijgbaar. Afhankelijk van het model kunnen ze handmatig of automatisch zijn, met spike- of draadaansluiting. 45 L/MIN, toevoerslangpilaar Ø 19 mm. Vloeistofinlaat:19 mm slangpilaar Vloeistoffen:AdBlue/DEF Maximale uitlaatdruk:5 bar (72,5 psi) Meter:N.v.t Maximale vrije stroomlevering (SI):45 l/min, 12 gal/min Gewicht:0,9 kg (2 lb) Bedrijfstemperatuurbereik:-20 - 55 °C (-4 - 131 °F) Maximale vrije stroomlevering:45 l/min Metriek:-

Features Our highest impact solid stream. Interior design featuring minimal pressure drop generates large flow of solid stream jet. Impact of turbulent flow inside the piping can be minimized. Applications High pressure cleaning: Wire and felt parts of paper making machines, vehicles, returnable containers, machinery, parts Trimming: Paper making Pipe conn. size:R 1/8" - R 3/8" Spray angle:- Mean droplet diameter:- Strainer:Available for some nozzle codes Standard pressure:3 MPa (ca. 30 bar) Spray capacity:0.034–104 ℓ/min Air Consumption:- Free passage diameter:0.1–5.4 mm

Features Pressure loss is minimal to enable high spray impact performance. Long thin slit with tapered nose is suitable for installation in a narrow space such as between support rolls. Drastic energy saving is achieved by switching from compressor-using type. Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment Spray pattern:Slit Pipe conn. size:- Standard pressure:- Spray angle:- Spray capacity:- Supply air type:Blower air

Features Extra fine and clear non-turbulent solid stream nozzles with high impact cutting force. Applications Trimming: Paper making, asbestos plate Cutting: Timber, food Others: Cleaning of precision machine parts, injection of chemicals, deburring, foaming of beer (jet foamer) Pipe conn. size:R 3/8" Spray angle:- Mean droplet diameter:- Strainer:Included or available Standard pressure:1 MPa (ca. 10 bar) Spray capacity:0.06–3.03 ℓ/min Air Consumption:- Free passage diameter:0.2–1.5 mm

Features Taking in surrounding liquid, EJX series solution agitation nozzle spouts out 3-4 times more volume than the amount supplied. Simple structure and compact design suitable for multiple-nozzle arrangement. Applications Solution agitation, preventing deposition, uniformizing concentration and pH Cleaning in liquids Submerged etching Plating Pipe conn. size:R 1/8 Spray angle:- Mean droplet diameter:- Strainer:Not included Standard pressure:0.05 MPa (ca. 0.5 bar) Spray capacity:3.1–460 ℓ/min (Reference value) Air Consumption:- Free passage diameter:1.5–17.5

Features Large spray coverage. Air spray volume can be adjusted by changing nozzle tips. Capable of steam spraying. Applications Cleaning, Dust suppression, Drying, Air curtain Humidification, Temperature control, Moisture control Spray pattern:Flat Pipe conn. size:R 1/4", R 3/8" Standard pressure:0.3 MPa (ca. 3 bar) Spray angle:- Spray capacity:154–1,122 ℓ/min, Normal Supply air type:Compressed air, Steam

The high voltage at both emitter points is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The nozzle blowoff force is high at a relatively low air consumption. Features - Working distance: 250 mm max. - Air consumption: 3,5 Nm3/h using 1 bar - Max. pressure: 7 bar - Shockless touchable emitters - Being installed outside the air flow, the emitter pins are hardly subject to fouling, if at all - Can be fitted on a standard air header - Click system for easy assembly

The Cobra ionizing air gun is excellently suited for heavy-duty industrial applications. It has a lightweight durable gun body made of highimpact plastic. The airflow is controlled by the trigger. The air flow is amplified by a minimum factor of 6 : 1 by drawing in ambient air through the rear. The high-voltage point integrated aerodynamically in the gun body cleans itself during use. The gun comes standard with 6 metres of cable. Two guns at most can be connected to a single power unit. - Working distance: 600 mm max. - It comes standard with 6 metres cable, 12 metre is also possible - Ideal for heavy-duty industrial applications - The emitter pin is cleaned during use

Features Download Manual KBN Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. Capable of generating extremely fine spray. Minimal clogging with free passage diameter 1.3–2.6 times bigger than that of conventional nozzles. The whirl chamber is formed by a ceramic orifice and closer, which provides excellent wear resistance. Applications Cooling: Poultry farms, Outside cooling Humidifying: Air handling units, greenhouses Spraying: Alcohol, disinfectant Others: Dust suppression, irrigation for greenhouse Pipe conn. size:R 1/4" Spray angle:80° Mean droplet diameter:35–60 μm Strainer:Included or available Standard pressure:1 MPa (ca. 10 bar) Spray capacity:2.00–7.25 ℓ/hr Air Consumption:- Free passage diameter:0.2–0.4 mm

Features Low-speed rotating nozzles for tanks/containers cleaning. Rotation of 5–10 rpm at 0.3 MPa (ca. 3 bar). Maximized contact time between cleaning object and spray liquid achieves higher cleaning effect. High heat-resistant. Applications Cleaning of tanks, containers, filling machines, and conveyors Pipe conn. size:Rc 1/8" – Rc 3/4" Rated pressure:0.15–1.0 MPa (ca. 1.5 - 10 bar) Spray capacity:9.19–274 ℓ/min Reach distance:- Cleaning distance:- Max. allowable temperature:150℃ (300°F)

60cc vetpompen met duwwerking. Metalen vat, zerkmondstuk (vet/olie). Ze leveren vet of olie met een maximale druk van 150 bar wanneer ze op een smeernippel worden gedrukt. Volledig metalen constructie voor bulkvet. Vloeistoffen:Vet Maximale uitlaatdruk:150 bar (2175 psi)

Features Low-pressure type rotating nozzle. Solid stream jet provides high cleaning performance. As the nozzle part is movable, it is easy to insert into and eject from a tank or equipment. Compact design allows for installation in a tank with a small inlet. *1) Spray capacity for each model: RJ3-2-Φ7: 103 L/min (at 0.3 MPa, ca. 3 bar)–169 L/min (at 0.8 MPa, ca. 8 bar) RJ3-2-Φ8: 127 L/min (at 0.3 MPa, ca. 3 bar)–207 L/min (at 0.8 MPa, ca. 8 bar) RJ3-4-Φ6: 146 L/min (at 0.3 MPa, ca. 3 bar)–239 L/min (at 0.8 MPa, ca. 8 bar) *2) Reach distance of RJ3-4-Φ6 is approx. 9 meter in radius. Applications Cleaning of tanks, chests, and containers, cleaning inside the chests (material tanks of papermaking) Pipe conn. size:Rc 1*1/2 Rated pressure:0.3–0.8 MPa (ca. 3 - 8 bar) Spray capacity:103–239 ℓ/min (*1) Reach distance:Approx. 10 m in radius (*2) Cleaning distance:- Max. allowable temperature:80°C (176°F)

Features Pneumatic slit-laminar nozzle with uniform spray distribution throughout the entire spray pattern area. While multiple-nozzle alignment of conventional pneumatic spray nozzles leaves some spots unwashed, PSN nozzles provide uniform spray distribution and achieve a complete cleaning, leaving no spot unwashed. PSN can be used at a short distance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) and liquid pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) for PSN nozzle with slit length of 1000 mm and slit opening of 0.05 mm. Applications Cleaning: Glass substrate, liquid crystal Cooling: Steel plates, moldings Moisture control: Paper, cardboard [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning Thread standard:- Pipe conn. size:Rc 3/8" Standard pressure:- Spray angle:- Spray capacity:8.0–28.0 ℓ/min (*1) Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:- Air Consumption:520–1,700 ℓ/min, Normal (*1) Air pressure:- Free passage diameter:-